Cooling Output Temperature, Checking

WARNING: This page is about a different variant/trim than selected.

Checking

-- Close the hood.

-- Measure the ambient temperature.

-- Close doors, window and sunroof.

-- Open all instrument panel vents.

-- Set the A/C system temperature to "cold".

-- Set the air distribution to the center vent.

-- Keep the temperature sensor -2- approximately 20 mm -3- into the shown air vent -1- area.

Fig 1: Identifying Temperature Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn on the A/C system by pressing the AC button.

-- Start the engine.

NOTE:

Start of time measurement (five minutes).

-- Bring engine speed to 2, 000 RPM and hold it there.

Evaluate

Depending on the ambient temperature, the temperature of the air coming out of the "driver side" vents must be within the tolerance range (see diagram) after five minutes.

Fig 2: Temperature Diagram

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -

The temperature of the air coming out of the "driver side" vents

B -

Ambient temperature

C -

Permissible tolerance range