Panorama Sunroof, Checking Functionality, Cleaning And Lubricating Guide Rails
Special tools and workshop equipment required
- Lint-free cloth or applicator
- Adhesive lubricating paste G 060 751 A2
- Wet and Dry Vacuum Cleaner VAS 5128
-- Check the functionality of the Panorama sunroof.
If there are any noises or complaints during the functionality test, perform the repair.
-- Open the glass panel all the way.
Do not clean or lubricate the guide -green-. Danger of causing damage.
-- Clean all parts that are going to be lubricated with a lint-free cloth or applicator and using Wet and Dry Shop Vacuum VAS 5128 beforehand.
-- Lubricate the inside and outside of the guide rails on both side -green- with Adhesive Lubricating Paste G 060 751 A2.
-- Lubricate the guide rails -arrows-, approximately the first 10 cm, on both side with Adhesive Lubricating Paste G 060 751 A2.
Be careful not to get any other parts or the passenger compartment dirty.
If the locking piece on the rail should get detached while cleaning or lubricating, do not operate the Panorama sunroof! Danger of causing damage.
Locking the Rail:
-- Carefully press the lever -green- downward.
-- Push the locking piece -blue- on the side with a screwdriver over the lever -green-.