ATF Cooler, Round Version: Installing
Install in reverse order of removal. Note the following:
NOTE:
Replace the O-rings after disassembly.
-- Install the plate spring:
- It must contact the washer.
- The convex side of the plate spring faces up.
-- Insert the tab -arrow B- into the opening in the transmission housing when installing the ATF cooler -1-.
-- Install the coolant hoses to the ATF cooler according the markings made during the removal.
-- Check the coolant level and fill if necessary. Refer to GENERAL INFORMATION , GENERAL INFORMATION , GENERAL INFORMATION or GENERAL INFORMATION .
-- Install the battery tray and the battery. Refer to REMOVAL AND INSTALLATION .
-- Check the ATF level.
-- Install the engine cover with the air filter. Refer to REMOVAL AND INSTALLATION , REMOVAL AND INSTALLATION , REMOVAL AND INSTALLATION or REMOVAL AND INSTALLATION .