Fuel Injector Control Module (FICM)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
The coil-operated spool valve requires 48 volts at up to 20 amps to operate, which is more power than the PCM can supply. Therefore, a high power device, the FICM, is used to supply power to the solenoid on command from the PCM. For additional information refer to the DIESEL POWERTRAIN CONTROL HARDWARE .