B10A5 - Left Blend Door Control Circuit Open: Notes
For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS information.
Theory of Operation
The A/C heater control drives the left blend door actuator via the left blend door driver circuit and the common door driver 2 circuit.
- >>When Monitored:<< With the ignition on.
- >>Set Condition:<< If the left blend door actuator electrical circuit is open.
| Possible Causes |
|---|
| DRIVER BLEND DOOR DRIVER CIRCUIT C61 OPEN |
| COMMON DOOR DRIVER 2 CIRCUIT C807 OPEN |
| LEFT BLEND DOOR ACTUATOR |
| A/C HEATER CONTROL |
NOTE:
DTC B1043 must be active for the results of this test to be valid. Do not perform this test if DTC B1043 is stored. Refer to HVAC system test (ATC) for stored DTC test procedures.