Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the RH C-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Disconnect the antenna module connectors.
- Disconnect the antenna cable-to-antenna module connector.
- Disconnect the antenna module electrical connectors.
- Disconnect the antenna module-to-antenna connector.
- Remove the bolt and the antenna module.
- To install, tighten to 12 Nm (9 lb-ft).
- To install, reverse the removal procedure.