LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Routan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 624 (Manual Transaxle/Transmission External Controls) >> Removal And Installation >> Gearshift Lever >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gearshift Lever: Installation

WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the gearshift lever assembly in the vehicle.
  2. Install the 4 gearshift lever nuts.
    • Tighten to 23 Nm (17 lb-ft).
  3. Connect the selector cable.
  4. Connect the shift cable.
    • Tighten the nut to 9 Nm (80 lb-in).
  5. Adjust the gearshift cables. For additional information, refer to MANUAL TRANSAXLE/TRANSMISSION AND CLUTCH - GENERAL INFORMATION .
  6. Install the 2 console screws to the shifter base, the 2 front console center bolts and then install the 2 rear side console bolts.
  7. Install the floor console finish panel.
  8. Install the gearshift knob.
scientia non olet · About LEMON Manuals