Left Engine Mount And Bracket: Installing

WARNING: This page is about a different car, the 2010 Volkswagen Routan and 2009 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the engine mount bracket to the transmission.

-- Install the engine mount bracket bolts to the transmission.

Fig 1: Identifying Engine Mount To Frame Rail Upper And Lower Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the engine mount (3).

-- Install the engine mount to frame rail upper (1), and lower (2) bolts. Tighten the bolts to 50 Nm (37 ft lbs).

Fig 2: Identifying Engine Mount Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the engine mount bolts (1). Tighten the bolts to 95 Nm (70 ft lbs).

Fig 3: Identifying Heater Line Bracket Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the heater line bracket, and install the heater line bracket bolts (2).

-- Remove the lifting devise, as necessary.

-- Connect the negative battery cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .