LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Routan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 1475 (Body System - Full Frame & Body Mounting System) >> General Procedures >> Welding Precautions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Welding Precautions

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. If welding must be done on a frame, make sure the following requirements are met:
    • If the frame is attached to the vehicle, the battery ground cable must be disconnected before using any electrical welding equipment. For additional information, refer to GENERAL PROCEDURES article.
    • Do not use gas welding equipment; arc welding is the only approved method.
    • Use a temperature-indicating crayon to make sure that the temperature does not exceed 750°C (1,382°F).
    • No welding should be done between the No. 2 crossmember (aluminum) and the center sidemember.
scientia non olet · About LEMON Manuals