C123A - Electronic Stability Program System Sensors Calibration

Fig 1: Electronic Stability Program System Sensors Wiring Diagram

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

For a complete wiring diagram, refer to appropriate Wiring Diagram.

• >>When Monitored:<< Once per ignition cycle.
• >>Set Condition:<< If the calculated Test sum does not match the stored test sum.

Test Step 1 - Initialize Anti Lock Brakes Module 

• Initialize ECU refer to ABS Verification Test. Refer to ABS VERIFICATION TEST (2009 - 2011) or ABS VERIFICATION TEST (2012 & UP) .

Does this DTC reset?

Yes

• Replace the anti lock brake module. Refer to Removal and Installation .
• Perform ABS Verification Test. Refer to ABS VERIFICATION TEST (2009 - 2011) or ABS VERIFICATION TEST (2012 & UP) .

No

• Test complete.