Wheel Alignment Specified Values

Specified values valid for all engine versions.

Standing heights listed in the tables refer to dimension -a-.

Fig 1: Identifying Dimension From Center Of Wheel To Lower Edge Of Wheel Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Front Axle

Basic Suspension

Comfort Suspension

PR numbers

G02; G11

G05

Total toe (wheels not pressed)

10' ± 10'

Camber (wheels in straight ahead position)

-30' ± 30'

-21' ± 30'

Maximum permissible difference between both sides

maximum 30'

Toe-out angle ⁽¹⁾ with steering wheel turned 20° to left and right

1°33' ± 20'

1°14' ± 20'

Caster

7° 55' ± 30'

7° 27' ± 30'

Maximum permissible difference between both sides

maximum 30'

Standing height

397 +/- 10 mm

407 +/- 10 mm

⁽¹⁾	The toe angle difference can also be indicated negatively in alignment computer, depending on manufacturer.

Specified values valid for all engine versions.

Rear Axle, FWD	Basic Suspension	Comfort Suspension
Camber	-1° 20' ± 30'	-1° 20' ± 30'
Maximum permissible difference between both sides	maximum 30'	maximum 30'
Total toe (at prescribed camber)	+10' ± 10'	+10' ± 10'
Maximum permissible deviation from direction of rotation	maximum 20'	maximum 20'
Standing height	396 +/- 10 mm	406 +/- 10 mm