LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat 3.6 SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (2.0L - Generic Scan Tool - Engine Code: CKRA) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> Reducing Agent Reversing Valve Checking >> Start Diagnosis
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Start Diagnosis

WARNING: This page is about a different variant/trim than selected.

-- Disconnect the T8 electrical harness connector located on the left side frame rail near the rear axle.

Checking resistance

-- Using a multimeter, measure the resistance of the Reduction Agent Reversing Valve -N473- terminals T8/1 to T8/3 (component side).

Specified value: 11.4 Ω (+/- 2.5 Ω)

If the specified value was Not obtained:

-- Replace the Reduction Agent Reversing Valve -N473-. Refer to the service information for removal and installation procedures.

If the specified value was obtained: