Engine Speed Sensor -G28-: Removing

-- Remove the engine cover.

-- Open the air guide pipe hose clamp -2-.

Fig 1: Air Guide Hose Bolts, Air Guide Pipe Hose Clamps & Electrical Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -arrow-.

-- Remove noise insulation, refer to Description and Operation .

-- Remove the charge air hose -A- and then cover the charge air cooler with a clean cloth.

Fig 2: Removing Change Air Hose

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 and 4- and remove the air guide hose downward from the Throttle Valve Control Module -J338-.

Fig 3: Air Guide Hose Bolts, Air Guide Pipe Hose Clamps & Electrical Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1- from the Engine Speed Sensor -G28-.

Fig 4: Engine Speed (RPM) Sensor G28

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Engine Speed Sensor -G28- bolt.