Checking Wiring
-- Remove the Engine Control Module -J623-. Refer to the Repair Information.
-- Using a multimeter, Check the Camshaft Adjustment Valve 1 -N205- electrical harness connector terminal to the Engine Control Module electrical harness connector T60 for an open circuit.
| Camshaft Adjustment Valve 1 -N205- electrical harness connector terminal: | Engine Control Module electrical harness connector T60 terminal: |
|---|---|
| 2 | 60 (Golf) or 5 (EOS, Jetta) |
Specified value: 1.5 Ω Max.
If the specified value was Not obtained:
-- Check the wiring connection for an open circuit, short circuit to Battery positive or Ground.
-- Check the wiring connection for damage, corrosion, loose or broken terminals.
-- If necessary, repair the faulty wiring connection.
If the specified value was obtained:
-- Replace the Engine Control Module -J623-. Refer to the Repair Information.