SERVICE INTERVAL DISPLAY, RESETTING WITH Vehicle Diagnostic Tester

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Switch on the ignition.

-- Select Guided Functions  .

If the displays indicated in the procedure are not shown on the display: Refer to Operating Instructions for Vehicle Diagnostic Tester.

-- Select the following one after the other:

• Brand
• Type
• Model year
• Engine code

-- Confirm the VIN.

-- Select the following one after the other:

Vehicles through MY 2013 

• "Instrument Cluster"
• "Service Interval Display, Resetting"

Vehicles from MY 2014 

• "Instrument Cluster"
• Select the service that is to be reset.

All Vehicles 

-- Adapting according to "Guided Functions".

End Adaptation

-- Select Go to  and then press End  .

-- Turn off the ignition and disconnect the diagnostic connector.

-- Switch on the ignition.

After switching on the ignition, service event is no longer indicated in the odometer display in the instrument panel insert.