Electronic Anti-Theft System
WARNING: This page is about a different variant/trim than selected.
The radio navigation system has an anti-theft coding, which operates in conjunction with the instrument cluster.
After disconnecting the power supply, the radio navigation system is ready to be used again once the power supply is connected. The radio code does not need to be entered again. The anti-theft coding must be activated for the first time and the radio navigation system must be connected in the same vehicle.
Use the Vehicle diagnostic tester to get the anti-theft code. The radio card and the label on the radio/navigation system that were used in the past are no longer used.
NOTE:
The Vehicle diagnostic tester must be online (connected to the network) in order to get the anti-theft code and the user must be authorized to access radio codes.