Disassembly And Assembly: Transmission: Assembly: Notes
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Holding Plate VW 309
- Holding Fixture VW 313
- Transmission Support VW 353
- Thrust Tube VW 455
- Sleeve 3160
- Slide Hammer-Complete Set VW 771
- Kukko Puller 12-14.5 mm 21/1
- Kukko Separating Tool 5-60 mm 17/0
- Kukko Support 22/1
- Bracket 30-211 A
- Thrust Piece T10143
- Press Tool for Shaft Seal T10180
- Drift T10169 or T10362
- Thrust Piece T40008
- Torque Wrench (5-50 Nm) V.A.G 1331
- Inductive Heat Unit V.A.G 1416
- Drip Tray for VAS 6100 VAS 6208