Selector Mechanism Overview
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Selector Lever Handle
- With selector lever boot and cover
- Do not remove the handle unnecessarily.
- Only the cover needs to be unclipped for emergency release. Refer to EMERGENCY RELEASE FROM P (PARK POSITION)
- Removing and installing. Refer to SELECTOR LEVER HANDLE .
- Refer to BUTTON IN HANDLE, MOVING INTO INSTALLATION POSITION .
- Clamp
- Replace after removing
- For fastening the handle on the selector lever
- Attach using Hose Clip Pliers VAG 1275A
- Selector Mechanism with Selector Lever Cable
- with integrated Selector Lever Sensor System Control Module -J587- with Selector Lever -E313-, Tiptronic Switch -F189-, Selector Lever Park Position Lock Switch -F319- and Selector Lever Solenoid -N110-
- Selector lever cable can only be replaced together with the selector mechanism
- Removing and installing. Refer to SELECTOR MECHANISM .
- Do not grease the selector lever cable.
- Check the selector mechanism. Refer to GEARSHIFT MECHANISM, CHECKING
- Selector Lever Cable, Checking and Adjusting, refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING
- Bolt
- 8 Nm
- Nut with Collar
- 8 Nm
- Quantity: 4
- Selector Housing
- Available only together with the selector mechanism.
- Bracket
- For selector lever cable
- Selector Lever Cable
- Must not be removed from the selector mechanism and is replaced together as a single component.
- Transmission
- Tunnel/Body