Clean Working Conditions
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Always clean the connection points and the area around them first, and then loosen them.
- Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung SetVAS6122.
- Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil and paper. Use a lint-free cloth.
- Always make sure that no dirt enters an open transmission.
- Only install clean components. Install replacement parts immediately after removing them from their packaging.
- Cover all opened components carefully if it necessary to perform a repair.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.