A/C Compressor Sub-Assembly Bracket - Engine Code(S): BLV
Special tools and workshop equipment required
- Torque wrench -V.A.G 1331- (or 5-50 Nm equivalent)
NOTE:
The bracket for A/C compressor and ancillary parts can be removed and installed without opening the refrigerant circuit.
Removing the ribbed belt, refer to [For transmission(s) 09M] Removal and Installation
Position of ribbed V-belt, refer to "Ribbed Belt Routing" below.
- Ribbed Belt
- Removing and installing, refer to [For transmission(s) 09M] Removal and Installation .
- Ribbed Belt Pulley - Coolant Pump
- Tensioning Roller
- Sub-Assembly Bracket For Generator and A/C Compressor
- Number on the sub-assembly bracket -038 903 143 AF-.
Removal
-- Loosen A/C compressor, unscrew hex-bolts -9-. Remove A/C compressor from auxiliary component bracket and secure to body with appropriate material (for example, welding wire), refer to Securing A/C Compressor to Body .
-- Remove the screws from the sub-assembly bracket.
Follow the tightening sequence when installing, refer to Sub-assembly Bracket Tightening Sequence .
- Fitting Bolt
- 25 Nm
- Generator
- Dowel Sleeves
- Quantity: 2
- Make sure they fit correctly between the auxiliary component bracket and the A/C compressor.
- A/C Compressor
- Removing and Installing, refer to A/C COMPRESSOR .
- Hex Bolts M8 X 100
- 25 Nm
- Quantity: 3
- Fitting Bolt
- 25 Nm