LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2011 >> CC VR6 4Motion >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.0L - Engine Assembly - Engine Code: CKRA) >> 10 Engine Assembly >> Removal And Installation >> Engine, Installing >> Tightening Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Specifications

WARNING: This page is about a different car, the 2014 Volkswagen Passat, 2013 Volkswagen Passat, and 2012 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
Bolted Connections Tightening Specifications
- M5 4.5 Nm
Bolts and Nuts M6 10 Nm
- M7 15 Nm
- M8 20 Nm
- M10 40 Nm
- M12 65 Nm (1)
Manual transmission Refer to [For transmission(s) 0A4] Specifications[For transmission(s) 02Q] Specifications[For transmission(s) 02E] Specifications .
DSG® Refer to [For transmission(s) 0A4] Specifications[For transmission(s) 02Q] Specifications[For transmission(s) 02E] Specifications .
A/C compressor Refer to Specifications .
Subframe Refer to Special Tools .
Drive axle Refer to Special Tools .
Engine/transmission mount Refer to FASTENER TIGHTENING SPECIFICATIONS .
Particulate filter Refer to FRONT EXHAUST PIPE WITH PARTICULATE FILTER .
(1) Tightening specification for a M12 collar bolt: 75 Nm.