Vehicle Electrical System Control Module -J519-

Removal 

-- Turn off the ignition and all electric consumers and remove the key.

-- Remove lower storage compartment on driver's side. Refer to Removal and Installation .

NOTE:

The number of multi-pin harness connectors -1- at Vehicle Electrical System Control Module can deviate from the illustration depending on vehicle equipment.

Fig 1: Identifying Vehicle Electrical System Control Module J519 & Harness Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release locking mechanisms of multi-pin harness connectors -arrows- and disconnect multi-pin harness connectors -1- from Vehicle Electrical System Control Module -2-.

-- Remove Vehicle Electrical System Control Module -2- with wires connected to rear side out of bracket.

-- Release locking mechanisms of multi-pin harness connectors -arrows- and disconnect multi-pin harness connectors -1- from Vehicle Electrical System Control Module -2-.

Fig 2: Identifying Vehicle Electrical System Control Module & Multi-Pin Harness Connectors

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove Vehicle Electrical System Control Module from vehicle.

Installation 

Install in reverse order of removal.