Right Engine Mount/Bracket: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Routan, 2013 Volkswagen Routan, 2012 Volkswagen Routan, and 2011 Volkswagen Routan. However, it is still accessible from the selected car via links, so may be relevant.

-- If removed, install the right engine mount bracket (1) and tighten bolts (2 and 3) to:

Fig 1: Right Engine Mount Bracket With Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tighten M10 bolts (2) to 55 Nm (41 ft. lbs.)
Tighten M8 bolt (3) to 25 Nm (18 ft. lbs.).

-- Install the right engine mount isolator (4). Tighten bolts (6) to 50 Nm (37 ft. lbs.).

Fig 2: Identifying Ground Strap, Upper Engine Mount Bracket, Bolts, Nuts And Right Engine Mount Insulator

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the upper engine mount bracket (2) and tighten bolts:

Tighten bolts (1) to 55 Nm (41 ft. lbs.).
Tighten nuts (5) to 20 Nm (15 ft. lbs.).

-- Install the ground strap (3) to the upper engine mount bracket (2).

-- Remove the floor jack.

-- Raise and support the vehicle.

-- Install the belly pan.

-- Lower the vehicle.