Service Interval Display, Resetting

Service interval display must be reset at

Delivery Inspection
Every service

(adapted)!

NOTE:

The service interval display can also be reset manually. When resetting the service interval display manually, make sure the vehicle is coded for fixed intervals, i.e. every 15, 000 km or 12 months. The adaptation channel for the oil quality will also change when doing this.

-- Connect the vehicle diagnosis tester. Refer to VEHICLE DIAGNOSIS TESTER, CONNECTING .

-- Switch the ignition on.

-- Touch the >>GUIDED FUNCTIONS<< button/field on the screen.

If the displays indicated in the procedure are not shown on the display, refer to operating Instructions for the Vehicle Diagnosis Tester

-- Press > button to confirm.

-- Select in succession:

Brand
Type
Model year
Engine Code

-- Confirm vehicle identification.

-- Select in succession:

"Instrument cluster" -ARROW-

Fig 1: Identifying "Instrument Cluster" Selection On Scan Tool
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
"Service interval display, resetting"

-- Perform Adaptation according to instructions from "GUIDED FUNCTIONS".

Fig 2: Identifying "Go To" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

End Adaptation

Indicated on display:

-- Press the Go to button -arrow- on display.

Indicated on display:

Fig 3: Identifying "Exit" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press Exit button -arrow- on display.

-- Press Exit button in exit menu.

-- Turn off ignition and disconnect diagnostic connection.

-- Switch the ignition on.

After switching on the ignition, service event is no longer indicated in the odometer display in the instrument panel insert.