Function 07 - Data Bus on Board Diagnostic Interface Coding, From 10.00

Function 07 - Data Bus On Board Diagnostic Interface Coding, from 10.00

- Connect scan tool VAG 1551 , input address word 19 "Gateway" and then press button until "Select function XX" is shown in display.
- Press buttons 0 and 7 to select function "Code control module".

Indicated on display:
Rapid data transfer Q
07 - Code control unit

- Press Q button to confirm input.

Coding

Indicate on display:
Code control module
Enter code number XXXXX (0-32000)

- Enter code number compiled from code table.

Control modules to power-train
databus Code:
ABS activated 00002
Airbag activated 00004
ABS and Airbag activated 00006

NOTE: Transmission control module message is not codified because it is automatically learned.