DVD Player
Special tools and workshop equipment required
- Release Tool T10315
Removing
-- Open folding center armrest.
-- Press button -arrow- and fold control unit on DVD player up.
-- Remove control unit from DVD player.
-- Unclip frame with a suitable screwdriver at areas marked with -arrows- and remove.
-- Insert release tools T10315 in DVD player -arrows-.
Release tools must be inserted so that thicker part on lower end of tool -A- faces toward DVD player housing. Otherwise, the catch spring on DVD player cannot be pressed correctly with release tool.
-- Move release tools sideways -arrows- so that nut in the release tools catches behind tab on DVD player.
-- Now pull DVD player out of installation frame with both release tools.
-- Release connector -arrow- on back side of DVD player and remove.
Installing
-- Place DVD player on rubber buffer -arrow-. Place DVD player wiring connection on connector -A-.
-- Carefully slide DVD player into frame in center console until it audibly engages.
-- The rest of the installation is performed in the reverse order.
-- Finally, check multimedia system for functionality.
DVD player is installed in storage bin in center console below foldable armrest.