Transmission to Engine Tightening Specifications

Transmission to Engine Tightening Specifications





1 - Driving Direction

- Drive Plate to Converter

• 60 Nm

• Quantity: 6, remove and install using (V/175).

- M12 Bolts

• 80 Nm

• 65 Nm, if using (T10179).

- M10 Bolts

• 40 Nm

• The bolts are located in the lower flange

- Two alignment sleeves inside the engine - arrows -

- Make sure the bracket does not touch the ATF cooler.





Nuts - 8 Nm