Servicing Damaged Surfaces

Fig 1: Preparing Surface Damaged Area For Repair

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Cut damaged surface to a V form.
Sand area approximately 50 mm wide around damaged surface -hatched area- using 150 grade emery cloth.
Clean repair with silicone remover.

Fig 2: Fiberglass Resin Application Area

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Mix fiberglass reinforced polyester resin (observe manufacturers instructions) and apply to repair section -hatched area-.
After applied material has hardened, sand repair section and clean with silicone remover.