Section 24 (Brake System - OBD (A4 Platform))
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2009 Volkswagen Golf, 2008 Volkswagen Golf, 2007 Volkswagen Golf, 2006 Volkswagen Golf, and 2006 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- 01 On Board Diagnostic (OBD)
- ABS ITT Mark 20 IE On Board Diagnostic (OBD)
- Electrical/electronic components and locations
- ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
- ABS ITT Mk 20 IE On Board Diagnostic (OBD) program
- V.A.G 1551 Scan Tool, connecting and selecting function
- Diagnostic Trouble Code (DTC), memory
- Automatic test sequence
- Vehicle Diagnosis, Testing and Information System VAS 5051, connecting and selecting ABS control module
- Diagnostic Trouble Code (DTC) table
- Diagnostic Trouble Code (DTC) memory, erasing and ending output
- ABS control module, coding
- Measured value block, reading
- Safety precautions
- Output Diagnostic Test Mode (DTM)
- Basic setting, initiating
- ABS, ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE, electrical check
- ABS Mark 60 On Board Diagnostic (OBD), vehicles from my 10.00
- Electrical/electronic components and installing locations
- Diagnostic Trouble Codes (DTCs) displayed by warning lights -K47-, -K118- and -K155-
- On Board Diagnostic (OBD), performing
- Test prerequisites for OBD
- Safety precautions
- Scan tool, connecting
- V.A.G 1551 scan tool, connecting and selecting function
- List of selectable functions
- Automatic test sequence
- Diagnostic Trouble Code (DTC) memory, checking
- Output Diagnostic Test Mode (DTM)
- Diagnostic Trouble Code (DTC) table
- Diagnostic Trouble Code (DTC) memory, erasing and ending output
- ABS control module, coding
- Vehicle data label
- Measured value block, reading
- Notes
- Overview of selectable display group numbers
- Test sequence and test tables with measured values
- Checking speed sensor allocation
- Checking speed sensor
- Checking brake light switch, brake system warning lamp, ABS warning lamp and ASR/ESP warning lamp
- Checking steering angle sensor, sensor for transverse acceleration and sender for rotation rate1)
- Checking sensor for transverse acceleration -G200-1)
- Checking brake pressure sensor 1)
- Checking longitudinal acceleration sensor -G251-1)
- Checking data bus wiring
- Basic setting, initiating
- Notes
- Display group number 01: Bleeding hydraulic unit
- Display group number 40: switching off longitudinal acceleration sensor -G251-
- Display group number 60: zero compensation of steering angle sensor -G85-
- Display group number 63: zero compensation of Sensor for transverse acceleration -G200-
- Display group number 66: zero compensation for Sender 1 for brake booster -G201-
- Display group number 69: zero compensation of longitudinal acceleration sensor -G251-
- Display group number 93: activation of ESP driving test
- Login procedure
- Electrical check of Mark 60
- Definitions