Automatic headlamps, checking
NOTE:
- Automatic headlamps are also called Automatic Headlamp Control.
- Vehicle must be in daylight.
Checking in daylight or brightness
- Switch ignition on.
- Turn light switch - 4 - to automatic headlamps position - 2 -.
The headlamps should not come on when it is bright.
Checking at night or in darkness
- Ignition is switched on
- Light switch is on automatic headlamps
Rain/Light Recognition Sensor -G397- is secured in rearview mirror area.
Rain/Light Recognition Sensor -G397- is located in upper center area of front windshield - arrow -.
- Cover area where rearview mirror is secured with hand or suitable object from outside of windshield - arrow -.
The decrease in light is measured and the headlamps are switched on.
- Turn light switch - 4 - to O position - 1 - and switch ignition off.