Cruise Control Module: Service and Repair

Cruise Control, Control Module -J213-, Removing And Installing

The cruise control, control module -J213- is located behind the airbag unit on front passenger's side.

Removing
- Switch off all electrical consumers, switch off ignition and remove ignition key.
- Remove glove box
- Disconnect electrical connector







- Remove screw -4-.
- Pull control module -3- out of retainer lip -inset- and remove.

Installing:
- Insert control module - bracket tab into retainer lip -inset-.
- Install screw -4- (ensure speed clip -2- is fitted).
- Reconnect electrical connector.