Transmission Selector Mechanism Assembly Overview

Fig 1: Exploded View Of Shift Mechanism Components On Transmission Side Up To Transmission Manufacture Date 180503

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Hex nut, 20 Nm
   • Removing and installing, refer to SELECTOR CABLES ASSEMBLY OVERVIEW  16
2. Gear selector lever
   • Install so that master spline aligns with selector shaft
   • Can be replaced with selector mechanism installed
   • Installed position SELECTOR CABLES ASSEMBLY OVERVIEW .
3. Shoe
   • Clip into relay lever, refer to item  6
4. Lock washer
   • Removing Figure
5. Bushing
6. Relay lever
   • Installed position SELECTOR CABLES ASSEMBLY OVERVIEW .
7. Selector mechanism cover
8. Ball sleeve
   • For selector shaft
   • Removing Figure
   • Pressing in Figure
9. Selector shaft
10. O-ring
    • Always replace
11. O-ring
    • Always replace
12. End cover
13. Oil seal
    • Pry out with screwdriver
    • Installing Figure
14. Protective cap
    • For selector shaft
15. Cap
    • For transmission breather