Vehicle Alignment

The following work sequence must be followed!

1 - Check front axle camber and adjust if necessary FRONT AXLE CAMBER, ADJUSTING .

2 - Check rear axle camber.

• Camber is not adjustable, notes REAR AXLE CAMBER, ADJUSTING .

3 - Check rear axle toe and adjust if necessary.

The rear axle toe is not adjustable, notes REAR AXLE TOE, ADJUSTING .

4 - Check front axle toe and adjust if necessary FRONT AXLE TOE, ADJUSTING .

5 - Check which suspension is installed in the vehicle. This information can be found on the vehicle data sticker VEHICLE DATA LABEL Explanation of the PR. No. on vehicle data sticker