Crankshaft, Engine

Crankshaft Main Bearing Cap Bolts 30 Nm plus additional 1/2 turn (180°) further Replace
Turning 2 x 90° further is permitted
Crankshaft
Axial clearance
new 0.07 0.24 mm,
Wear limit 0.30 mm
Check radial clearance with Plastigage
New 0.02 0.06 mm
Wear limit 0.10 mm
Do not turn crankshaft when checking the radial clearance
Crankshaft dimensions
Main bearing 59.958 ... 59.978 mm
Connecting Rod bearing 53.958 .... 53.978 mm