Work sequence

• Connect the VAG1551 scan tool (VAG1552). Then switch ignition on and select engine control module with the "Address word" 01.(Connecting scan tool and selecting engine control module, see VAG1551 SCAN TOOL, CONNECTING AND SELECTING ENGINE CONTROL MODULE .)

Indicated on display:

Fig 1: Identifying Scan Tool Display - Readiness Code, Reading (1 Of 3)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

• Press keys 1 and 5 for the "Readiness code" function and confirm entry with Q key.

  Must appear on display when all diagnostic functions have been successfully completed:

  Indicated on display:

  Fig 2: Identifying Scan Tool Display - Readiness Code, Reading (2 Of 3)

  Courtesy of VOLKSWAGEN OF AMERICA, INC.
• Press --> key.
• Press keys 0 and 6 for "End data transfer" function and confirm input with Q key.

  Indicated on display:

  Fig 3: Identifying Scan Tool Display - Readiness Code, Reading (3 Of 3)

  Courtesy of VOLKSWAGEN OF AMERICA, INC.

  One of the diagnostic checks has not run through successfully:

• Press --> key.
• Generate readiness code. For engine code AWW, see READINESS CODE FOR ENGINE CODE AWW, GENERATING ; for engine code AWP, see READINESS CODE FOR ENGINE CODE AWP, GENERATING 

Significance of 8 digit number block for readiness code