ATF, Replacing

• Remove noise insulation tray.
• Place drip tray under transmission.

Fig 1: Identifying ATF Drain Plug

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove drain plug - arrow  - from transmission housing.
• Drain ATF.
• Install drain plug with new oil seal, install and tighten.

If ATF must be added, use only ATF listed in Electronic Parts Catalog "ETKA". 

• Add about 2.5 l of ATF.
• Then start engine and shift through all selector lever positions with vehicle stationary.
• Finally, check ATF level and top off. Refer to ATF level, checking and topping off  .