Function 07 - Data Bus On Board Diagnostic Interface Coding, Through 09.00
-- Connect scan tool VAG 1551, input address word 19 "Gateway" and then press → button until "Select function XX" is shown in display.
-- Press buttons 0 and 7 to select function "Code control module".
Indicated on display:
| Rapid data transfer Q 07 - Code control unit |
-- Press Q button to confirm input.
Indicated on display:
| Code Control Module Enter code number XXXXX (0-32000) |
-- Enter code number compiled from code table
| Control modules to power-train databus | Code: | |
| Transmission Control Module (TCM) | 00001 | |
| ABS control module | 00002 | |
| Airbag control module | 00004 | |
To determine code number, add applicable control module code numbers together.
Example:
Airbag + ABS + TCM
00004 + 00002 + 00001 = 00007
Indicated on display (example):
| 6N0909901 Gateway K <-> CAN 0001 Coding 00007 WSC 00000 |
-- Press Q button to confirm input.
Indicated on display (select function):
| Rapid data transfer HELP Select function XX |
-- Press buttons 0 and 6 to select function 06 "End output".
The scan tool is again in basic function.