Up to 10.00

Data Bus On Board Diagnostic Interface -J533- Up To 10.00, coding (function 07)

- Connect VAG 1551 Scan Tool (ST), input address word 19 "Gateway" and then press -> button until "Select function XX" is shown in display.
- Press buttons -0- and -7- to select function "Code control module".

Indicated on display:


Rapid data transfer Q
07 - Code control unit


- Press -Q- button to confirm input.

Indicated on display:


Code Control Module
Enter code number XXXXX (0 - 32000)


- Enter code number compiled from code table


Control modules to power-train databus Code:
Transmission Control Module (TCM) 00001
ABS Control Module 00002
Airbag Control Module 00004



To determine code number, add applicable control module code numbers together.

Example:
Airbag + ABS + TCM
00004 + 00002 + 00001 = 00007

Indicated on display (example):


6N0909901 Gateway K <-> CAN 0001
Coding 00007 WSC 00000


- Press -Q- button to confirm input.

Indicated on display (select function):


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6- to select function 06 "End output".

The scan tool is again in basic function.