FS III Front Brake Caliper

FS III Front Brake Calipers, Servicing

Note:
^ Install all parts supplied in the repair kit.
^ New brake calipers are filled with brake fluid and are pre-bled.
^ Apply a thin coat of lubricant, Part No. G 052 150 A2 to brake cylinders, pistons and seals.

1. Dust cap
2. Bleeder valve
^ Apply a thin coat of assembly lubricant G 052 150 A2 to threads before installing.
3. Cap
^ Install in mounting bushing.
4. Guide Pin, 28 Nm (21 ft. lbs.)
^ Removing and installing. Refer to Front brake caliper piston, removing and installing.
5. Mounting bushing
^ Install in brake caliper housing.
6. Brake caliper housing
7. Protective seal
^ Removing and installing
8. Piston
^ Removing and installing
^ Before installing apply a thin coat of assembly lubricant G 052 150 A2 to piston.
9. Piston seal
^ Removing and installing.