LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1997 >> Passat GLX, 4D Sedan, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Tests W/Codes - 1.9L) >> Circuit Tests >> DTC 00542/2211: Needle Lift Sensor >> Input Open
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Open

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect needle lift sensor 2-pin connector. Measure resistance between connector terminals. If about 80-120 ohms are not present, replace No. 3 cylinder injector with needle lift sensor. If about 80-120 ohms are present, go to next step.
  2. Connect Adapter (VAG 1598/18) to ECM wiring harness. Ensure continuity is present between needle lift sensor connector terminal No. 1 and adapter terminal No. 12, and between needle lift sensor connector terminal No. 2 and adapter terminal No. 11. Repair wiring as necessary. If wiring is okay, replace DFI ECM.
scientia non olet · About LEMON Manuals