DTC Memory, Mode 3

DTC MEMORY, MODE 3

- Press -3- button to select "DTC Memory" mode 3.

Indicated on display

x DTC recognized Module 10* ->
MIL off Module 1A*

Module 10* or 1A* will be activated (alternately):

- Module 10 = Engine Control Module (ECM) -J220-
- Module 1A = Transmission Control Module (TCM) -J217-
- MIL OFF / ON = MIL switched OFF or ON

- Press -> button, any stored DTCs will be displayed in sequence

Indicated on display (example)

P0422

- Press -> button.

NOTES:
- If two or more DTCs are stored, the cause of the malfunction could be attributed to the second or following malfunction.
- Interpreting stored DTCs See DTC table, overview. Diagnostic Trouble Code Overview
- After malfunctions have been repaired; clear DTC memory Clear DTC Memory, Mode 4
and create the readiness code again Readiness Code, Creating

- Press -C- button to exit mode 3.