Removing And Installing Multi-Function Switch
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 Volkswagen EuroVan, 2002 Volkswagen EuroVan, 2001 Volkswagen EuroVan, 2000 Volkswagen EuroVan, and 1999 Volkswagen EuroVan. However, it is still accessible from the selected car via links, so may be relevant.
Pull connector off multi-function switch.
Remove bolt and retainer.
Place drip tray under the transmission.
Remove multi-function switch.
Always replace O-ring.
Installation is performed in the reverse order.
Tighten bolt to 10 Nm (89 Inch lbs.)
Check ATF level and top off. See SERVICING - A/T article.