Stall Speed Test

Engage parking brake and block drive wheels. Connect tachometer to engine. Warm engine to operating temperature.
Firmly depress brake pedal. Move gear selector to "D". Open throttle to wide open throttle position. Note engine speed and release throttle pedal.
CAUTION: Do not operate engine at stall speed for more than 5 seconds. If you need to repeat stall speed test, wait 20 seconds.
Compare measured stall speed with stall speed specification. See STALL SPEED SPECIFICATIONS table. If stall speed is within range, test is complete.
If stall speed is too low, check engine condition and adjustments. If no problems with engine are found, torque converter may be defective. If stall speed is too high, check 1st-3rd apply clutch or one-way clutch for slipping or damage.

STALL SPEED SPECIFICATIONS