Removal & Installation - A/T: Removal
- Disconnect battery ground strap and starter cable. from transmission. Remove 2 upper engine-to-transmission attaching bolts. Loosen left side transmission mount. Install Support Fixture (10-222).
- Remove 5 rear transmission mounting bolts. Mark axle drive shaft for reassembly reference, and disconnect from final drive flanges. Remove starter bolts and position starter out of way.
- Remove transmission protection plate and converter cover plate, then remove drive plate-to-torque converter bolts. Place selector lever in "P" position and disconnect selector cable from transmission, then disconnect accelerator and pedal cable from bracket.
- Support transmission with fixture (US 4470) attach to engine hoist. Remove left side engine/transmission mount. Detach side carrier and mount from transmission. Remove front mount. Remove lower transmission-to-engine bolts. Lift transmission slightly and, taking care not to allow converter to drop. lower transmission from vehicle.