LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1983 >> Rabbit Base, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T - Overhaul >> Component Disassembly & Reassembly >> Second Gear Brake Band Servo Piston Assembly >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Second Gear Brake Band Servo Piston Assembly: Reassembly

  1. Position spring retainer, accumulator spring and shim(s) on piston pin. Install assembly into servo piston and retain with "E" clip on pin. Install NEW lip seals on piston as follows: Smaller (upper) seal is installed on piston with lip facing upward (into servo cover). Larger seal is installed on piston with lip pointed downward (out of servo cover).
  2. Lubricate piston and cover assembly thoroughly with ATF. Install piston into cover using a twisting motion. Ensure piston seals are not damaged or forced out of position. Install NEW "O" rings on outer diameter of servo cover.
  3. Using suitable lever, press cover and piston assembly into transmission case against spring pressure until circlip can be installed. Ensure circlip is completely seated in groove of case.
scientia non olet · About LEMON Manuals