Jaguar & Triumph
- Release pressure from main fuel line at cold start injector and connect fuel pressure gauge. Disconnect negative lead from ignition coil and turn ignition switch "ON".
- Note pressure reading. Slow pressure drop is permissible; sudden pressure drop requires check of entire fuel system.
- On Jaguar only, operate fuel change-over switch on dash and recheck reading. Reading from both fuel tanks should agree. On all models, if pressure reading is not to specifications, replace fuel pressure regulator.
NOTE:
Datsun recommends using Kent-Moore Electronic Fuel Injection Analyzer (J-25400) to perform tests on any component of fuel injection system. Follow manufacturers' instructions.